Fine-Finishing Sander 1.25" thickness, 5.75" length, 3.75" width

Non Woven Flap Wheel with Shaft

Description:

This High Performance Nonwoven material is converted into wheels on 6-mm shaft to be used on straight grinders. 

Recommended applications:

Work surfaces: 
Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminum, cast iron, titanium, plastic.

SKU#	Diameter mm	Width mm	Shaft mm	Coarse	Medium	Fine	Ultra   Fine	Max. Speed	Qty per pack	Qty per Carton
	30	10	6	•	•	•	•	17,100	10	200
	30	20	6	•	•	•	•	17,100	10	200
	30	30	6	•	•	•	•	17,100	10	200
	40	20	6	•	•	•	•	17,100	10	100
	40	30	6	•	•	•	•	17,100	10	100
	50	20	6	•	•	•	•	13,700	10	100
	50	30	6	•	•	•	•	13,700	10	100
	60	30	6	•	•	•	•	11,500	10	100
	60	40	6	•	•	•	•	11,500	10	100
	80	30	6	•	•	•	•	8,600	10	100
	80	50	6	•	•	•	•	8,600	10	100
	100	50	6	•	•	•	•	6,000	10	100

 

Interleaved Flap Wheels with Shaft

Description: These wheels on 6-mm shaft are made of a combination of cloth flaps and High Performance Non - woven material. To be used on straight grinders.

Work surfaces: Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminum, cast iron, titanium.

SKU#	Diameter mm	Width mm	Shaft mm	Grit #60	Grit #100	Grit #150	Grit #240	Max. Speed	Qty per pack	Qty per Carton
	30	20	6	•	•	•	•	17,100	10	200
	30	30	6	•	•	•	•	17,100	10	200
	40	20	6	•	•	•	•	17,100	10	200
	40	30	6	•	•	•	•	17,100	10	100
	50	30	6	•	•	•	•	13,700	10	100
	60	30	6	•	•	•	•	13,700	10	100
	60	40	6	•	•	•	•	11,500	10	100
	80	50	6	•	•	•	•	8,600	10	100
	100	50	6	•	•	•	•	6,000	10	100